Manual operating units
Do you have questions?
For switching of direct current magnets. The control for switch-on takes place by the actuation of the yellow and green membrane keys. The pole-reversal process is initiated using the yellow and red membrane key. Possible faults detected by the pole-reversal control devices are also displayed using the red membrane key and the coded flashing signals. The adhesion force can be selected in 8 stages.
In order to adhere to accident prevention regulations for machine tools, it is essential to release the machine feed using auxiliary contacts only when the clamping magnet is activated and to monitoring the activation position using a signal lamp. Control units comply with these regulations. The signal lamp is integrated in the keys of the control unit. Auxiliary contacts for the machine feed are provided in the pole-reversal control device.
Manual operating unit SAV 876.02 - SE3
Denomination SAV - No. - type
Housing size (LxWxH): 130 x 60 x 60 mm
Operating voltage: 24 V
Protection type: IP 63
Protection class: III