SAV 243.76

Reinforced magnet system with demagnetisation cycle. Optimised system for high adhesion forces. Fully magnetic, saturated system due to flow concentration.

SAV 220.76

Milling magnet also for hard machining. Amplified magnet system with demagnetising cycle. Optimised system for high holding forces. Magnetically fully saturated system thanks to flux concentration. Design SAV 220.76 square (pallet), Design SAV 243.76 rectangular.

SAV 243.77-27,5

For heavy milling with high level of material removal. Ideal for use on pallet changing systems.

SAV 243.77-55

For heavy milling with high level of material removal. Ideal for use on pallet changing systems.

SAV 243.77-85

For heavy milling with high level of material removal. Ideal for use on pallet changing systems.

SAV 243.78

For large-area, thin parts, e.g. for widening weld seams.

SAV 243.79

Milling magnet for flexible use with high holding force.

SAV 248.70 (eckig/cornered)

As add-on elements for magnets. Can only be used in conjunction with magnetic chuck SAV 243.77-55 and SAV 243.77-85 or SAV 243.76-65, SAV 243.76-85 and SAV 243.80.

SAV 248.70 (rund/round)

As add-on elements for magnets. Can only be used in conjunction with magnetic chuck SAV 243.77-55 and SAV 243.77-85 or SAV243.76-65, SAV243.76-85 and SAV243.80.

SAV 243.77-RAIL

For heavy machining of the running faces, feet and fishplate seating of rails. The one-part or two-part magnet system allows lateral alignment in the first step (FA). Then the main magnet is activated in the base (FH).

SAV 244.70

A strong magnetic field is the special feature of our circular magnets. The magnetic force is generated by the permanent magnets which are magnetised and demagnetised with short current pulses.

SAV 244.71

Hard turning and extreme material removal for turning applications on small and large workpieces. Grinding with maximum precision.

SAV 244.72

The circular magnets with circular pole pitch allow several workpieces to be chucked off-centre. The strong magnetic field is distributed evenly across the pole plate.

SAV 244.73

Circular magnet with fine pole pitch for thin parts. Centre also magnetically active.

SAV 244.76

Combination of magnetic and mechanical workholding

SAV 876.12

For permanent electro-magnet systems with 210 V or 360 V magnetic clamping.

SAV 248.84

The shown carbon brush holders are used for power transmission to the collector ring in case of permanent, round electro-magnets. They are delivered in 3 sizes along with fastening bolts.

SAV 248.85

Collector rings are used in combination with carbon brush holders for supplying power to rotating permanent round electro-magnets.

SAV 242.92

Electro permanent magnetic chuck towers chuck towers, precision-milled

SAV 890.02

The demagnetisers are suitable for use in measuring rooms, workshops and production lines and have a strong action for demagnetising bearing rings, dies, swages and other tools.